Use FLEXI-SHEEN™ Rubber Wax and Conditioner to clean, condition and protect and beautify flat rubber and studded rubber floors in one easy step. FLEXI-SHEEN™ should be used as part of a complete maintenance program. An exceptional blend of waxes, detergents, polymers, and gloss enhancers. With FLEXI-SHEEN™, the floor surface is cleaned while a water-resistant coating remains to improve slip resistance. FLEXI-SHEEN™ is a unique formulation that will not build up. FLEXI-SHEEN™ may also be used on linoleum, no-wax floors, PVC, and concrete surfaces for industrial applications, office buildings, schools, and hospitals. Authorized UL Product

KEY MARKET INFORMATION

• Using FLEXI-SHEEN to clean, protect, and improve slip resistance on weight room floors will be appreciated by your school's athletes.

• Protect the rubber surfaces in the physical rehabilitation areas of your healthcare facility, while improving the slip resistance to further protect rehabilitating patients.

• With more and more retailers opting for the advantages of rubber flooring surfaces, FLEXI-SHEEN will add attractiveness to the toughness and durability of the rubber floor.

• As the popularity of rubber surfaces in industrial facilities grows, so too does the need for an effective maintenance program. FLEXI-SHEEN provides the next level of protection while increasing slip resistance, to decrease working injury likelihood.

• As rubber becomes a more popular and viable floor material in many different professional environments, Building Service Contractors must be well-equipped to properly maintain these surfaces. FLEXI-SHEEN will add attractiveness to the toughness and durability of the rubber floor.

ROUTINE/DAILY CLEANING:

FLEXI-SHEEN™ can be used on a daily, as-needed basis, quarterly, or semi-annually as traffic dictates.

• Dust mop the floor with an approved dust mop treatment to remove all dry soil and loose debris prior to cleaning.
• Dilute 2-8 oz. of FLEXI-SHEEN™ per gallon of warm water into a mop bucket or automatic scrubber.
• Mop onto the floor or apply through an automatic scrubber.
• After the floor has dried, you may buff the floor with a high-speed machine and a soft pad in order to achieve a higher gloss.

INITIAL/RESTORATION Cleaning or After Degreasing using FLEXI-CLEAN™ Intensive Rubber Cleaner and Grease Remover:

• Dust Mop floor with CONTROL Dust Mop Treatment to remove all dry soil and loose debris prior to cleaning.
• Do not dilute FLEXI-SHEEN™ prior to using. Pour undiluted FLEXI-SHEEN™ into the mop bucket.
• Apply FLEXI-SHEEN™ using a wet mop or a flat mopping system. Apply as you would a floor finish (approximately 2,500 - 3,000 square ft. per gallon coverage).
• Allow the floor to dry thoroughly, 15 - 20 minutes is usually sufficient.
• For maximum gloss, repeat steps 3 and 4.
• After the floor has dried, buffing the floor with a high-speed machine and a white or Aqua Magic™ pad will achieve a higher gloss.